Oakleaf Aged products are created using heat-treatment technology.

The ageing treatment process only uses steam and heat, no chemicals or agents are applied to the timber during the process.

Tests have shown no harmful emissions are apparent when working with the timber. Aged timber is an environmentally friendly product and any left over pieces of aged timber can be burnt or disposed of into the normal waste system.

Due to its attractive appearance, unique colour variations homogenous through the cross section, stability and lack of resins, Oakleaf aged timber is well suited for indoor use – in saunas, interior panels, furniture and flooring.

Specifying timber that has been produced using heat treament technology ensures deformations like warping, swelling and shrinkage are minimised.

Aging treatment reduces the timber equilibrium moisture by as much as 50%.

The lack of resins increases coating adhesion. However, it is very important to have a clean surface before coating and carefully follow the coating producer’s instructions for application.

Heat-treated timber can be coated with oil-based, water-based and solvent-based finishes.

It has been observed that the material may absorb more priming coating than natural timber – this, however, ensures better and longer lasting penetration.

As with all natural products, aged timber needs protection against UV light. If the colour and appearance is to be maintained, a surface treatment with UV-block should be applied.

Without protection, heat-treated timber will gradually fade just like other timber species.